PRODUCTS
Label Printer Applicators		  
   
FOX 2000 Standard

Specifications

FOX IV's Standard Body Sized Label Printer Applicators are full-sized units with large 406mm OD label roll capacities for extended production and increased up-time. Standard units are ideal for mid to high volume applications. A selection of units are available from basic print and apply operation to full self-diagnostic units as well as Turbo options for higher applications speeds.

Bullet1.gif (898 bytes) Approx. Standard Body Size Dimensions: 660 L x 303 W x 637 H mm *

Bullet1.gif (898 bytes) Approximate Weight: 41 kg

Bullet1.gif (898 bytes) Label Roll OD: 406 mm

Bullet1.gif (898 bytes) Minimum Label Gap: 3 mm

Bullet1.gif (898 bytes) Minimum Core Size: 76 mm (Core size of 127 mm recommended for labels      over 127 mm long)

* may vary according to print engine.

Technical Specifications
 
Communication

Baud Rate: 300 to 19,200

Handshaking: XON/XOFF

Encoding: Serial ASCII

Interface: RS232 or RS422

 

 Utilities/Environment

Electric: 230 VAC +/-5%; Single Phase 50 Hz

Air: 3 CFM clean dry air @ 80 psi max

Temperature: 4 -38 C

Humidity: 10-95% Non-condensing